Nissan 350z Luggage Rack

We manufacture a unique Nissan 350z Luggage Rack alternative- the boot-bag. We are based in the UK but ship to the USA daily. We also manufacture an innovative rack for the 350z Revo Rack. Please see below.

Boot-bag for Nissan 350z & 370z

Boot-bag is a waterproof luggage bag that simply straps to the trunk lid of your Nissan adding either 1.75 or 2.65 cubic feet of waterproof luggage space. ( we call a trunk a boot in the UK ) The bag simply straps around your Z's trunk. It sits on a soft non slip mat to protect paintwork. The straps stay in place once the bag is fitted and won't rub the trunk edge.

Why a boot-bag Luggage Rack for your 350Z/370Z ?

Fully Waterproof & No risk of any paintwork damage
Attaches using soft webbing so no damage to paint or boot lid edge.
Sits on a soft non slip mat to protect trunk lid
Hand made in Buckinghamshire UK since 2008 - 000's sold globally = tried & tested design.
Folds flat for easy storage, can be removed in minutes and stored inside if you stop on route.
Saves Money ; half the price of a rack and waterproof holdall/suitcase
If you purchase a traditional rack you still need waterproof luggage...

Read a review of boot-bag 350z Luggage Rack by the Delaware Valley Miata Club here.

We make two models of boot-bag Trunk Rack For 350Z/370Z:

Boot-bag Original 28"x15"x8" adding 1.75 cubic feet of extra luggage space $130 & $38 shipping.

Boot-bag Vacation 36"x16x8" adding 2.65 of extra luggage space $165 & $38 shipping.

Nissan 350Z Luggage Rack : Revo Rack $280 & $49.95 shipping.

This rack manufactured by us in the UK is made from 25mm Aluminium & Magnesium tube and thus the frame only weighs 1.7kg/ 3.5lbs The design of this rack allows it to fit in under 30 seconds, no bolts, no brackets, no straps = no paint damage.

The Revo Rack details

This car luggage rack is manufactured from 25mm/ 1"6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for today's aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm /36"x17"

The rack sits on three 115mm vacuum cups these are rated as being able to hold an 18kg load each. Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force.

Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching boot/trunk lid thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

Why a Revo Rack ?

Rack Frame Measures 900x 420mm / 36 x 17"
Foot Print of rack with feet 1020mm x 480mm
Sits 75mm / 3" off the trunk lid
Can be fitted with the hoop at rear or front of trunk lid
Can carry 20kg-25kg / 45-55 lbs
Fits any car trunk lid that takes the racks foot print