We manufacture a unique BMW 4 Series Luggage Rack - the boot-bag. We are based in the UK but ship to the USA daily. We also manufacture a traditional luggage rack for the 4 series Revo-Rack.
Boot-bag is a waterproof luggage bag that simply straps to the trunk lid of your BMW adding either 1.75 or 2.65 cubic feet of waterproof luggage space. The bag simply straps around your 4 series's trunk. It sits on a soft non slip fabric mat to protect paintwork. The straps stay in place once the bag is fitted and won't rub the trunk edge. It can be fitted to the Coupe and Convertible models.
Why a boot-bag BMW 4 series Luggage Rack ?
Fully Waterproof & No risk of any paintwork damage
Attaches using soft webbing so no damage to paint or trunk lid edge.
Sits on a soft non slip mat to protect trunk lid
Hand made in Buckinghamshire England since 2008 - 000's sold globally = tried & tested design.
Folds flat for easy storage, can be removed in minutes and stored inside if you stop on route.
Saves Money ; half the price of a rack and waterproof holdall/suitcase
If you purchase a traditional rack you still need waterproof luggage...
Read a review of boot-bag BMW 4 Series Luggage Rack by the Delaware Valley Miata Club here.
We make two models of boot-bag BMW 4 Series Luggage Rack :
Boot-bag Original 28"x15"x8" adding 1.75 cubic feet of extra luggage space $119 & $38 shipping. Shown on the black E46
Boot-bag Vacation 36"x16"x8" adding 2.65 of extra luggage space $145 & $38 shipping. Shown on the blue E93
BMW 4 Series Luggage Rack : Revo-Rack
Why a Revo-Rack ?
Fits in 30 seconds no tools required, no fiddly brackets or bolts.
With the tiny panel gaps on most modern sports cars fitting a conventional rack without damaging the boot edge or surface is almost impossible.
Lightweight aluminium & magnesium frame weighs 1.7kg will never rust
No straps or clamps on the boot surface/edge
Fits any boot lid that takes the racks foot print of 102 x 48 cm / 58" x 29" if you change cars in the future you don't need a new rack
Revo Racks load carrying capacity has been rated at 20kg / 45Ibs
Supplied with two luggage straps and storage bag
Made in the UK by the boot-bag group
The Rack Frame :
This luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy. As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm/36"x17"
The Vacuum Cup Supports
The rack is secured to your BMW's trunk lid using three 115mm/4.5" vacuum cups, rated as capable of holding an 18kg/40lb load each, technically the rack can hold 54kg.
The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.
How the boot-bag BMW 4 Series Luggage Rack works :