Nissan 350z Roadster Luggage Rack Unique Design

We manufacture a unique Nissan 350z Roadster Luggage Rack - the boot-bag. We are based in the UK but ship to the USA daily. We also stock a beautiful German made stainless steel luggage rack for the 350 or 370 Z

Boot-bag is a waterproof luggage bag that simply straps to the trunk lid of your Nissan adding either 1.75 or 2.65 cubic feet of waterproof luggage space. The bag simply straps around your Z's trunk. It sits on a soft non slip mat to protect paintwork. The straps stay in place once the bag is fitted and won't rub the trunk edge.

Why a boot-bag Luggage Rack for your 350Z/370Z Roadster ?

- Fully Waterproof & No risk of any paintwork damage
- Attaches using soft webbing so no damage to paint or trunk lid edge.
- Sits on a soft non slip mat to protect trunk lid
- Hand made in Buckinghamshire UK since 2008 - over 25,000 sold globally = tried & tested design.
- Folds flat for easy storage, can be removed in minutes and stored inside if you stop on route.
- Saves Money ; half the price of a rack and waterproof holdall/suitcase
- If you purchase a traditional rack you still need waterproof luggage...

Read a review of boot-bag Luggage Rack by the Delaware Valley Miata Club here.

We make two models of boot-bag Trunk Rack For 350Z/370Z Roadster:

Boot-bag Original 28"x15"x8" adding 1.75 cubic feet of extra luggage space $159.00

Boot-bag Vacation 36"x16x8" adding 2.65 of extra luggage space $194.95

Nissan 350Z Roadster Luggage Rack

Revo-Rack Black $379

Revo-Rack PA $449

Revo-Rack is a completely different, completely new type of Nissan 350z or 370z Luggage Rack, only manufactured by us in the UK. We manufacture the rack in either a black powder coated finish or a model thats hand polished and anodised for a deep shine.

It eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge/surface. Revo-Rack can be fitted in under a minute without any tools. Please watch the video's below.

Revo-Rack has been tested to ISO/PAS 11154-:2006 Road vehicles -- Roof load carriers : The international standard for roof bars. There is no standard for luggage racks. The rack underwent testing designed for roof bars, speed tests, load tests, and emergency braking tests. It passed all these tests. We believe it is the only convertible luggage rack for sale globally tested to this standard/level.

With the Revo-Rack Nissan Z convertible luggage rack no metal touches your Nissan only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Nissan's boot.

Why a Revo-Rack Nissan 350Z or 370Z Luggage Rack ?

Fits in 30 seconds no tools required, no fiddly brackets or bolts.
With the tiny panel gaps on the 350z fitting a conventional rack without damaging the boot edge or surface is almost impossible.
Lightweight aluminium & magnesium frame weighs 1.7kg will never rust
No straps or clamps on the boot surface/edge
Fits any deck lid that takes the racks foot print of 58" x 29" if you change cars in the future you don't need a new rack
Revo-Racks load carrying capacity has been rated at 45Ibs
Supplied with two luggage straps and storage bag
Made in the UK by the boot-bag group
Signed for delivery by UPS

The Rack Frame

This luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"

The Supports

The rack is secured to your Z's trunk lid using three 115mm vacuum cups, rated as capable of holding an 18kg/40lb load each, technically the rack can hold 54kg.

The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still recognised as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tabs near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the deck/trunk lid