We manufacture a unique Miata PRHT luggage rack alternative- the boot-bag. We also manufacture a luggage rack that allows the roof to be lowered on the PRHT NC the Revo-Rack.
REVO-RACK
Revo-Rack Black $379
Revo-Rack PA $449
Revo-Rack is a completely new type of Mazda Miata PRHT Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edge. The roof can be operated with the rack fitted.
With the Revo-Rack no metal touches your Miata's trunk lid only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot or trunk. We manufacture the Revo-Rack ourselves and offer two finishes powder coated black or hand polished and anodised. Both racks are made from the same T5 aluminium and magnesium 25mm/1" tube.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off.
Why a Revo-Rack Mazda Miata PRHT Luggage Rack ?
No clamps on the fragile deck/trunk lid edges
No bolts
Shipped with DHL Express in 2-5 days no import taxes no state taxes
No Straps across the trunk/deck lid surface
No paint damage.
Roof operation is possible with rack fitted on the Miata PRHT model
Conceived, designed and engineered for the Miata
Revo-Racks load carrying capacity has been independently tested and certified at 20kg/45lbs
Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
Supplied with luggage straps and a storage bag.
Soft rubber cannot chip your Miata
BOOT-BAG
Boot-bag Miata Luggage system
boot-bag is a waterproof luggage bag that simply straps to the trunk lid of your NC PRHT adding 1.75 or 2.65 cubic feet of extra luggage space. The straps simply loop around the trunk lid and the bag sits on a soft non slip rubber mat to protect paint.
Why a boot-bag Miata NC PRHT Luggage Rack ?
- Fully Waterproof & No risk of any paintwork damage
- Attaches using soft webbing so no damage to paint or trunk lid edge.
- Sits on a soft non slip mat to protect trunk lid, roof can be lowered with bag on trunk
- Hand made in Buckinghamshire UK since 2008 - over 25,000 sold globally = tried & tested design.
- Folds flat for easy storage, can be removed in minutes and stored inside if you stop on route.
- Roof can be operated with bag fitted if placed at rear of trunk as its 80% full
- Saves Money ; half the price of a rack and waterproof holdall/suitcase
- If you purchase a traditional rack you still need waterproof luggage...
Read a review of boot-bag Miata Luggage Rack by the Delaware Valley Miata Club here.
We make two models of boot-bag
Boot-bag Original $159 28"x15"x8" adding 1.75 cubic feet of extra luggage space
Boot-bag Vacation $195 36"x16"x8" adding 2.65 of extra luggage space
We have lots of happy PRHT American customers.
Waterproof luggage space without a rack
Revo-Rack PA Roof can be operated with rack fitted to trunk
Revo-Rack PA Hand polished for a deep shine. No fiddly clamps or brackets that chip paintwork ( Shown on NC Fabric roof fits PRHT )
Revo-Rack black no clamps on the fragile trunk lid edges.
Roof can be operated with the Revo-Rack in place
Boot-bag original on Miata PRHT
Boot-bag Vacation Miata Luggage Rack alternative shown on NC
Roof can just be lowered, if bag is very full loosen straps and pull bag back 2" then tighten.
Revo-Rack & roof operation
Revo-Rack PA & Black
Shut the trunk and place the matting on the top
Attach the ends of the straps to the bag.
All boot-bags are hand made by us in Buckinghamshire England since 2008. No one else makes boot-bags.
The boot-bag sits on soft non slip matting to protect paintwork its 4mm/0.16" thick and slightly bigger than the bag no metal hooks or clips to damage paint / trunk edge with this Miata PRHT luggage rack system.
