We manufacture a unique Ford Mustang Convertible Luggage Rack - the boot-bag. We are based in the UK but ship to the USA daily. We also manufacture a traditional luggage rack for the Mustang Convertible Revo-Rack.
Boot-bag for Ford Mustang
Boot-bag is a waterproof luggage bag that simply straps to the trunk lid of your Mustang adding either 1.75 or 2.65 cubic feet of waterproof luggage space. The bag simply straps around your Ford's series's trunk. It sits on a soft non slip fabric mat to protect paintwork. The straps stay in place once the bag is fitted and won't rub the trunk edge.
Why a boot-bag Ford Mustang Convertible Luggage Rack ?
- Fully Waterproof & No risk of any paintwork damage
- Attaches using soft webbing so no damage to paint or trunk lid edge.
- Sits on a soft non slip mat to protect trunk lid
- Hand made in Buckinghamshire England since 2008 - 25,000 sold globally = tried & tested design.
- Folds flat for easy storage, can be removed in minutes and stored inside if you stop on route.
- Saves Money ; half the price of a rack and waterproof holdall/suitcase
- If you purchase a traditional rack you still need waterproof luggage...
- Shipped in 2-5 days with DHL Express no import taxes no state taxes
Read a review of boot-bag by the Delaware Valley Miata Club here.
We make two models of boot-bag Ford Mustang Convertible Luggage Rack :
Boot-bag Original $159 28"x15"x8" adding 1.75 cubic feet of extra luggage space
Boot-bag Vacation $195 36"x16"x8" adding 2.65 of extra luggage space
Ford Mustang Convertible Luggage Rack : Revo-Rack
Revo-Rack Black $399.00
Revo-Rack PA $479.95
The Revo-Rack convertible luggage rack is made by us, the boot-bag group in the UK. It utilises vacuum cup technology and the latest in aerospace aluminium and magnesium tubing.
With the lightweight modern convertibles of today fitting a conventional luggage rack to the trunk lid without paint damage is getting harder and harder, as car manufacturing improves panel gaps are getting smaller and smaller. On the ND Miata the gap between the trunk lid and rear fender is 0.12" or 3mm there is literally no room for a clamp or strap to attach to the edge of the trunk. Revo-Rack was developed to overcome these issues.
We manufacture the Revo-Rack in either a black finish or a version thats hand polished and anodised for a deep shine.
Revo-Rack has been tested to ISO/PAS 11154-:2006 Road vehicles -- Roof load carriers : The international standard for roof bars. There is no standard for luggage racks. The rack underwent testing designed for roof bars, speed tests, load tests, and emergency braking tests. It passed all these tests. We believe it is the only convertible luggage rack for sale globally tested to this standard/level.
Why a Revo-Rack for your Mustang cabriolet ?
- Fits in 30 seconds no tools required, no fiddly brackets or bolts.
- With the tiny panel gaps on most modern sports cars fitting a conventional rack without damaging the trunk edge or surface is almost impossible.
- Lightweight aluminium & magnesium frame weighs 1.7kg/3.6lbs will never rust
- No straps or clamps on the trunk surface/edges
- Revo Racks load carrying capacity has been rated at 20kg / 45Ibs
- Supplied with two luggage straps and storage bag
- Made in the UK by the boot-bag group
- Shipped in 2-5 days with DHL Express no import taxes no state taxes
The Rack Frame :
This luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy. As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The rack frame measures 900x420mm/36"x17"
The Vacuum Cup Supports
The rack is secured to your Mustang's trunk/deck lid using three 115mm/4.5" vacuum cups, rated as capable of holding an 18kg/40lb load each, technically the rack can hold 54kg. These are not suction cups, suction creates vacuum.
The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.
Boot-bag original ads 1.65 cubic feet of extra luggage space
The larger boot-bag vacation adds 2.7 cubic feet
the boot-bags straps simply loop around the trunk lid
Revo-Rack PA is hand polished for a deep shine here on a 6th Gen Mustang
Revo-Rack will also fit the classic original Mustang convertible
We also make the Revo-Rack in black, no clamps on the fragile trunk lid edges with a Revo-Rack !
We make a special model for the 5th generation Mustang with the single vacuum cup moved to the first cross rail as the trunk lid is so shallow.
Soft rubber cannot chip or mark your Mustang
Revo-Racks are made by us with pride care and precision.
Stage one lay the straps out in an H shape
Lay the soft anti slip matting on the trunk lid
Attach the six strap ends to the ladderlock fixings on the boot-bag
All boot-bags are hand made by us in Buckinghamshire England since 2008. No one else makes boot-bags.
The boot-bag sits on soft non slip matting to protect paintwork its 4mm/0.16" thick and slightly bigger than the bag no metal hooks or clips to damage paint / trunk edge with this trunk rack system.
The soft base of the boot-bag has no clips or studs to damage paintwork, with the addition of the anti slip mat there is zero risk of damage, over 8 years of sales prove this.
